BWNCD - 1173, SATIN ENAMEL - DEEP BASE
- MSDS: BWNCD
- Manufacturer: PERVO PAINT CO
- Product Name: 1173, SATIN ENAMEL - DEEP BASE
- National Stock Number: 8010-00N056326
Product Identification
Product ID:1173, SATIN ENAMEL - DEEP BASE
MSDS Date:02/12/1993
FSC:8010
NIIN:00N056326
MSDS Number: BWNCD
Responsible Party
LOS ANGELES, CA 90001
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 213-758-1147
Cage: 86483
Contractor
Telephone: 213-758-1147
Cage: 86483
Ingredients
SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC
CAS: 64742-88-7
Fraction By Weight: 10-14%
OSHA PEL 500 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
SOLVENT NAPHTHA; (HEAVY AROMATIC NAPHTHA)
CAS: 64742-94-5
RTECS: WF3100000
Fraction By Weight: 2-4%
OSHA PEL N/K
ACGIH TLV: N/K
(EX WATER/EXEMPT SOLVENT) 250
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
(IN. WATER/EXEMPT SOLVENT) 250
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:PROLONGED OR REPEATED
CONTACT OF PRODUCT WITH SKIN MAY CAUSE IRRITATION. EYE:DIRECT
CONTACT OF PRODUCT WITH EYES CAN CAUSE IRRITATION. INHALATION:VAPOR
OR MIST CAN CAUSE HEADACHE, NAUSEA, I RRITATION OF NOSE, THROAT AND
EYES. MAYPRODUCE CENTRAL NERVOUS SYSTEM DEPRESSION. (EFTS OF
OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:INGESTION:POISONOUS IF SWALLOWED. MAY
RESULT IN VOMITING. ASPIRATION OF VOMITUS INTO LUNGS CAUSES
ASPIRATION PNEUMONITIS. CHRONIC:MAY CAUSE DAMAGE TO CENTRAL NERVOUS
SYSTEM, RESPIRATORY SYSTE M, EYES AND SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN:WASH AFFECTED AREAS W/WATER WHILE REMOVING CONTAMD
CLTHG. GET IMMED MED ATTN. LAUNDER CONTAMD CLTHG BEFORE REUSE.
EYES:FLUSH W/GENEROUS AMTS OF WATER FOR @ LEAST 15 MINS. GET IMMED
MED ATTN. INGE ST:IF SWALLOWED, DO NOT INDUCE VOMIT. CALL PHYS
IMMED. NEVER GIVE FLUIDS OR INDUCE VOMIT IF VICTIM IS UNCON/HAVING
CONVLS. INHAL:MOVE TO FRESH AIR. AID IN BRTHG, IF NEC, & GET IMMED
MED ATTN.
Fire Fighting
Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:1.0%
Upper Limits:7.0%
Extinguishing Media:FOAM, CARBON DIOXIDE. DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . BLANK VAPOR WITH EXTINGUISHING MEDIA.
Unusual Fire/Explosion Hazard:FLAMMABLE VAPOR CAN FORM EXPLOSIVE
MIXTURE WITH AIR.
Accidental Release
Spill Release Procedures:SPILLS SHOULD BE CONTAINED, SOLIDIFIED, &
PLACED IN RCRA LICENSED FACILITY. HNDLG EQUIP TO BE GROUNDED TO
PVNT SPARKING, WEAR ASPIRATORS, EYES & SKIN PROT. EMPTY CNTNRS W/NO
RESIDUE @ ALL MAY BE LANDF ILLED @ LICENSED FACILITY/FOR
RECONDITION.(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:SHOWER AFTER HANDLING THIS PRODUCT.
CLEAN CLOTHING SHOULD BE WORN DAILY. EMERG EYE WASH AND DELUGE
SHOWER WHICH MEETS ANSI DESIGN CRITERIA .
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
WHEN VAPORS ARE GENERATED ABOVE PERMISSABLE LIMIT.
Ventilation:LOCAL EXHAUST TO CONTROL TO RECOMMENDED PEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:COVERALLS, APRONS & BOOTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL RELEASE:RECOMMEND CRUSHING OR OTHER MEANS TO PREVENT UNAUTHORIZED
REUSE. OTHER CNTNRS MUST BE DISPOSED OF IN RCRA LICENSED FACILITY.
Chemical Properties
Boiling Pt:B.P. Text:280F,138C
Melt/Freeze Pt:M.P/F.P Text:280F,138C
Vapor Pres:<5 @100F
Vapor Density:4.5-5.3
Spec Gravity:1.30
Evaporation Rate & Reference:<1 (BUAC =1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE VISCOUS LIQUID, MILD AROMATIC ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING, REDUCING AGENTS IN CONJUNCTION WITH HEAT.
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS OR DIRECT
SUNLIGHT.
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:HEAT, POLYMERIZATION INITIATORS.
Disposal
Waste Disposal Methods:INCIN IN RCRA LICENSED FACILITY. DO NOT
DISCHARGE INTO WATERWAY/SEWER SYS. DISPOSAL MUST BE IN ACCORDANCE
WITH FEDERAL, STATE & LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.